Nokia Voyager Reference Manual page 184

Hide thumbs Also See for Voyager:

Table of Contents

Configuring Interfaces

Configuring a Static Route over an Unnumbered

3. Click the Static Routes link in the Routing Configuration section.

4. Enter the IP address of the destination network in the N

5. Enter the mask length (in bits) in the M

6. Select the type of next hop the static route will take from the N

You select an unnumbered logical interface as the next-hop gateway

when you do not know the IP address of the next-hop gateway.

9. Click on the G

unnumbered interfaces that are configured. Select the unnumbered logical

interface you want to use as a next-hop gateway to the destination

"Configuring an Unnumbered Interface"

on the home page.

drop-down window. Your options are N

. The default is N

drop-down window.

, and then click S

to specify the next-hop gateway type from the

drop-down window to view the list of

to make your change permanent.

for the interface.

Voyager Reference Guide