Nokia Voyager Reference Manual page 304

6
Configuring Routing
This configuration allows Nokia Platform D to prefer Nokia Platform A
(with the lower MED value of 100) over Nokia Platform B (with the
higher MED value of 200) as the entry point to AS100 while propagating
routes to AS100. Similarly, this propagates routes with an MED value of
50 to AS200, although there are no multiple entry points to AS200.
Configuring MED Values and Route Redistribution
Policy on Nokia Platform D
1. Click C
2. Click the BGP link in the Routing Configuration section.
3. Configure EBGP peers in AS100 and AS200 according to the
Neighbors Example."
4. Click the Route Redistribution link the Routing Configuration section.
5. Click the BGP link in the Redistribute to BGP section.
6. Enter
ROUTES TO
7. Enter necessary information for route redistribution according to the
"BGP MED (Multi Exit Discriminator) Example"
Setting an MED value along with route redistribution policy allows Nokia
Platform D to redistribute all routes to AS100 with an MED value set to
100.
Note
Setting an MED value along with route redistribution overwrites the MED
value for the external BGP peer for Nokia Platform D.
304
on the home page.
ONFIG
in MED edit box next to the E
100
AS100 field.
NABLE REDISTRIBUTE BGP
; then click A
Voyager Reference Guide
"BGP
.
PPLY