Nokia Voyager Reference Manual page 110

5
Configuring Interfaces
8. In the C
D
9. Click on the I
10. Select CHAP as the authentication method in the A
11. Enter
the A
12. Enter
section in the A
13. Click A
14. Click the Incoming Numbers link.
15. Enter
Information section.
16. Click A
17. Click S
Sample Call Traces
Traces for call setup between the Nokia Platforms are shown below. The
traces were produced by issuing the command "tcpdump -i <interface>" on
each machine. Traffic was generated by doing a "ping 206.226.15.1" on
IP300.
Note
To display the negotiated PPP values, run the tcpdump command with the
-v switch.
The trace for connecting a call from the IP330 is:
06:23:45.186511 O > PD=8 CR=23(Orig) SETUP:Bc:88 90.
CalledNb:80 33 38 34 30 32 30.SendComp:
06:23:45.255708 I < PD=8 CR=23(Dest) CALL-PROC:ChanId:89.
110
I
ONNECTION NTERFACE
edit box so that the connection is easily identified.
ESCRIPTION
NCOMING
in the N
AME
User
table.
UTHENTICATION
in the P
Password
UTHENTICATION
.
PPLY
in the N
UMBER
384000
.
PPLY
.
AVE
table, enter
Direction radio button.
edit box under the From Remote Host section in
edit box under the From Remote Host
ASSWORD
table.
edit box under the Add Incoming Call
in the
Remote Office
UTHENTICATION
Voyager Reference Guide
table.