Nokia Voyager Reference Manual page 137

Hide thumbs Also See for Voyager:

Table of Contents

9. Click the logical interface name in the I

10. Enter the IP address of the interface in the IP A

11. Enter the IP subnet mask length in the M

12. Enter a number in the IP MTU edit box to configure the device's

All hosts in the same LIS must use the same IP MTU in their interface to

13. (Optional) Change the interface's logical name to a more meaningful one

14. (Optional) Add a comment to further define the logical interfaces function

15. To make your changes permanent, click S

Voyager Reference Guide

A new logical interface appears in the I

interface is turned on by default.

You can create multiple logical interfaces by repeating steps 6–7.

maximum length (in bytes) of IP packets transmitted in this interface. The

default value and range depend on the hardware configuration. The

standard value is 9180. Click A

by typing the preferred name in the L

edit box. Click A

table to reach the Logical Interface page.

column. The new

column of the

edit box. Click