Table of Contents
Advertisement
Note
This value must be identical to the keepalive value configured on the
system at the other end of a point-to-point link, or the link state will
fluctuate.
12. Enter a number in the K
13. Click A
14. (Optional) Click the Advanced E1 CSU/DSU Options link to select
15. From the Advanced E1 CSU/DSU Options page, click the U
16. Click the Advanced PPP Options link.
17. Click Y
18. Click Y
19. Click A
20. Click U
Voyager Reference Guide
This value sets the number of times a remote system may fail to send a
keepalive protocol message within a keepalive interval before the systems
consider the link down. The range is a positive integer. The default is 30.
.
PPLY
advanced E1 options.
The E1 CSU/DSU Advanced Options page allows you to configure
fractional E1 channels and other advanced settings for an E1 device. The
values you enter on this page depend on the subscription provided by your
service provider.
return to the physical interface page.
The PPP Advanced Options page appears.
or N
in the N
ES
O
Clicking Y
enables the interface to send a request to negotiate a magic
ES
number with a peer.
or N
in the N
ES
O
Clicking Y
enables the interface to send a request to negotiate an MRU
ES
with a peer.
.
PPLY
to return to the Physical Interface page.
P
M
EEPALIVE
AXIMUM
M
EGOTIATE
AGIC
M
EGOTIATE
AXIMUM
F
edit box.
AILURES
button to
P
N
field.
UMBER
R
U
field.
ECEIVE
NIT
169
Advertisement
Table of Contents
