Configuring Igmp - Nokia Voyager Reference Manual

Hide thumbs Also See for Voyager:

Table of Contents

Configuring Routing

Query interval

Query response interval

Last-member query interval

Additionally, you can enable/disable router alert.

Configuring IGMP

3. Click the IGMP link in the Routing Configuration section.

4. Click the O

which you want to enable IGMP; then click apply.

5. Click the appropriate V

2; then click A

6. (Optional) Enter the loss robustness value in the L

box; then click A

7. (Optional) Enter the query interval in the Q

8. (Optional) Enter the query response interval in the Q

9. (Optional) Enter the last member query interval in the L

QUERY INTERVAL

10. (Optional) Click either the D

buttons; then click A

11. To make your changes permanent, click S

"Configuring an Ethernet Interface"

on the home page.

radio button next to the name of the logical interface on

edit box; then click A

edit box,; then click A

for the interface.

radio button to enable either version 1 or

UERY INTERVAL

ISABLE ROUTER ALERT ON

Voyager Reference Guide

OSS ROBUSTNESS

edit box; then

UERY RESPONSE