Nokia Voyager Reference Manual page 132

5
Configuring Interfaces
5. To make your changes permanent, click S
Changing the IP MTU of an ATM Interface
1. Click C
2. Click the Interfaces link.
3. In the L
which you want to change the IP address.
Example—
atm-s2p1
4. Enter a number in the IP MTU edit box to configure the device's
maximum length (in bytes) of IP packets transmitted on this interface.
Click A
Note
The maximum packet size must match the MTU of the link partner.
Packets longer than the length you specify will be fragmented before
transmission.
5. To make your changes permanent, click S
Removing an ATM Interface
1. Click C
2. Click the Interfaces link.
3. Click the physical interface link in the P
Configuration page.
Example—
atm-s2p1
132
on the home page.
ONFIG
column, click the Logical interfaces link for the item on
OGICAL
.
PPLY
on the home page.
ONFIG
.
AVE
.
AVE
column on the Interface
HYSICAL
Voyager Reference Guide