Nokia Voyager Reference Manual page 605

Hide thumbs Also See for Voyager:

Table of Contents

5. (Optional) To change the policy entry without changing the name of the

6. From the pulldown menu in the S

Only filters that present a single host but no subnet should be selected as

source filters.

If there are 40 or more source or destination filters, they will not be

displayed as a list on the Voyager page. To view a filter that is not

displayed, type the name of the filter in the appropriate field.

7. From the pulldown menu in the D

8. To make your changes permanent, click S

9. To delete any entries, click the D

Voyager Reference Guide

The new entry appears in the IPsec Transport Rules table.

associated transport rule, accomplish the following steps:

a. Click in the blank square next to the current policy entry. Click A

The policy name is removed.

b. Under the Policy column, select a policy option from the pulldown

menu and click A

associated transport rule.

name that corresponds to the source of the traffic that will be protected by

this policy. Click A

Repeat this operation to add as many filters as necessary. Click A

after each selection.

filter name that corresponds to the destination of the traffic that will be

protected by this policy. Click A

delete permanent, click S

. The new policy is entered without changing the

column, select a filter

column, select a

box and click A