Assigning Roles To Specific Interfaces - Nokia Voyager Reference Manual

10. Click S

Assigning Roles to Specific Interfaces

The Nokia COPS implementation lets you assign roles to specific interfaces.
A role refers to a logical name assigned to a group of objects within a
network. The role name lets you group objects to which you want to assign a
particular policy. You can also assign a combination of roles to a particular
logical interface. You then apply policies to role(s) and not just to a single
object.
1. Click either C
2. Click the COPS link in the Traffic Management section.
3. In the I
4. Click A
Note
You can assign multiple roles to each interface.
Note
You can assign different roles to different interfaces on the same system.
5. Click S
Voyager Reference Guide
to make your changes permanent.
AVE
ONFIG
Management link on the home page.
R
NTERFACE
role in the edit box next to the appropriate logical interface name.
The role name can be up to 31 characters long. Use alphanumeric
characters, the period, hyphen or underscore symbols only. Do not begin a
role name with the underscore symbol.
.
PPLY
to make your changes permanent.
AVE
on the Voyager home page or the Traffic
C
OLE OMBINATIONS
section, enter the name for a
425