Nokia Voyager Reference Manual page 82

Hide thumbs Also See for Voyager:

Table of Contents

Configuring Interfaces

7. Repeat steps 4 through 6 for each VLAN interface you want to create.

8. To assign an IP address to the new logical VLAN interface, click the link

for the logical interface in the I

box. Enter the mask length in the N

The new logical interface appears as active on the interface configuration

page. Click the U

(Optional) To disable the interface, click the

field in the row for the logical interface. Click A

You can assign multiple IP addresses to each logical VLAN interface.

Repeat steps 8 and 9 for each IP address you want to assign to the same

VLAN logical interface.

Deleting a VLAN Interface

2. Click the I

3. Click the link for the physical interface for which you want to delete a

VLAN interface in the P

physical interface page for the interface.

logical VLAN interface you want to delete.

The entry for the logical VLAN interface disappears from the L

table. Enter the IP address in the N

to make your changes permanent.

button to view that page.

to make your change permanent.

on the home page.

, and then click S

field of the L

EW MASK LENGTH

field. This action takes you to the

table, click the D

to make your change permanent.

edit box. Click

button in the A

, and then click

box in the row for the

Voyager Reference Guide