Table of Contents
Advertisement
To connect to the Internet:
• the wireless network you use must support data calls
or GPRS
• the data service must be activated for your SIM card
• you must have obtained an Internet access point from
your Internet service provider (ISP)
• you must have configured the proper Internet settings
Setting up an Internet access point
Some Internet service providers may offer you the
possibility to configure your Internet access point settings
by sending you a message. This might reduce the number
of settings you need to enter yourself, or eliminate the
need altogether. For more information , see "Plug and play
mobile services" on page 68.
The exact values for the settings are usually provided by
your service provider. Follow the instructions given to you
by your service provider very carefully.
Note that any data transfers via GPRS are subject to
applicable operator data transfer fees.
To set up Internet access point, tap
To edit an existing Internet access point, tap
pts.. Define the following fields on the pages of the
Internet setup wizard:
Connection name:
connection.
107
New access
— Give a descriptive name for the
Data bearer:
— Choose the data connection type. For more
information on data connection types, see "Data
connections" on page 29.
Depending on which data connection you select, only
certain setting fields will be available on the following
pages of the wizard.
Network type:
(for GPRS only) — Choose which version of
the Internet protocol you want to use.
Auto-retrieve access point:
operator supports this feature, the access point name
can be retrieved automatically from the network. The
access point is needed to establish a connection to the
GPRS network.
Access point name:
Auto-retrieve access point:
point. You can obtain the access point name from your
network operator or service provider.
Dial-up number:
— The modem telephone number of the access point.
Prompt password at every login:
pt..
write a new password every time you log onto a server,
Access
or if you do not want to save your password to the
media device.
User
name:— Write a user name if required by the service
provider. The user name may be needed to make a data
connection, and is usually provided by the service
provider. The user name is often case-sensitive.
(for GPRS only) — If your network
(for GPRS only) — If you do not use the
, define a name for the access
(for GSM data and high-speed data only)
— Select this if you must
Advertisement
Table of Contents
