Nokia Voyager Reference Manual page 402

7
Configuring Traffic Management
Deleting an Access Control List
1. Click C
2. IPSO supports both the IPv4 and IPv6 protocols.
a. For IPv4 ACLs, click the Access List Configuration link under the
b. For IPv6 ACLs, click the IPv6 link. This takes you to the IPv6 page.
3. Click the D
delete. Click A
The Access Control List name disappears from the Access List
Configuration page.
4. To make your changes permanent, click S
Applying an Access Control List to an Interface
1. Click C
2. IPSO supports both the IPv4 and IPv6 protocols.
a. For IPv4 ACLs, click the Access List Configuration link under the
b. For IPv6 ACLs, click the IPv6 link. This takes you to the IPv6 page.
3. Click the link for the appropriate Access Control List in the ACL N
field.
This takes you to the page for that Access Control List.
4. Select the appropriate interface from the A
window.
404
on the home page.
ONFIG
T M
RAFFIC ANAGEMENT
Click the Access List Configuration link under the T
M section.
ANAGEMENT
check box next to the Access Control List you want to
ELETE
.
PPLY
on the home page.
ONFIG
T M
RAFFIC ANAGEMENT
Click the Access List Configuration link under the T
M
section.
ANAGEMENT
section.
.
AVE
section.
I
DD NTERFACES
Voyager Reference Guide
RAFFIC
RAFFIC
AME
drop-down