Router Discovery - Nokia Voyager Reference Manual

4. To redistribute all currently active interface routes into RIPng, click the
5. Enter a value for the metric cost that the created RIPng routes will have in
6. Click A
7. To redistribute a specific interface route or routes into RIPng, click the
8. Enter a value for the metric cost that the created RIPng route(s) will have
9. Click A

Router Discovery

Configuring ICMPv6 Router Discovery
The ICMPv6 Router Discovery Protocol allows hosts running an ICMPv6
router discovery client to locate neighboring routers dynamically as well as to
learn prefixes and configuration parameters related to address
autoconfiguration. Nokia implements only the ICMPv6 router discovery
server portion, which means that the Nokia platform can advertise itself as a
candidate default router, but it will not adopt a default router using the router
discovery protocol.
1. Click C
2. Click the ICMPv6 Router Discovery Link in the IPv6 section.
3. To enable ICMPv6 router discovery, click the O
4. Click A
5. (Optional) To enable the managed address configuration flag in the router
Voyager Reference Guide
O button in the E
N XPORT ALL
the M edit box.
ETRIC
, and then click S
PPLY
O radio button next to the IPv6 interface for the route(s) you want to
N
redistribute into RIPng.
in the M
edit box.
ETRIC
, and then click S
PPLY
on the home page.
ONFIG
interface(s) on which you want to run the protocol.
.
PPLY
advertisement packet, click the Y
I
NTERFACES INTO
to make your changes permanent.
AVE
to make your changes permanent.
AVE
N
radio button in the M
ES
RIP
field.
NG
radio button next to the
ANAGED
665