Table of Contents
Advertisement
Note
The disk mirror traps are supported only on systems where disk mirroring
is supported.
18. (Optional) If you want to receive notification when a failover occurs from
19. (Optional) If you want to receive notification when a power supply for the
20. (Optional) If you want to receive notification when a fan fails, click the
21. (Optional) If you want to receive notification when a power supply failure
22. To disable any of the above traps, click the O
23. To make your changes permanent, click S
Setting the SNMP Trap Agent Address
1. Click C
2. Click the SNMP link.
Voyager Reference Guide
the primary cluster network to the secondary cluster network, click the
button next to the
CLUSTER
Click A
.
PPLY
system fails, click the
P
S
SYSTEM
OWER
UPPLY
includes the power supply index and is supported only on the IP530 and
IP740 platforms.
button next to the E
ON
This trap includes the fan index and is supported only on the IP530 and
IP740 platforms.
occurs because of high temperature, click the
E
S
O
NABLE
YSTEM
trap is followed by a power supply failure trap that specifies the power
supply index that failed. This trap is supported only on the IP530 and
IP740 platforms.
name of the trap. Click A
on the home page
ONFIG
P
ROTOCOL
button next to the E
ON
F
AILURE TRAPS
NABLE SYSTEM
T
VER
EMPERATURE
.
PPLY
I
C
NTERFACE
HANGE TRAPS
NABLE
field. Click A
PPLY
F
F
traps. Click A
AN
AILURE
button next to the
ON
traps field. Click A
radio button next to the
FF
.
AVE
ON
field.
. This trap
.
PPLY
. This
PPLY
641
Advertisement
Table of Contents
