Nokia Voyager Reference Manual page 621

Disabling Fault Management
This procedure describes how to disable alarm traps and trap resends.
1. Click C
2. Click the General Configurations link under the Fault Management
3. Select Disabled in the F
4. Click A
5. Click S
Configuring Alarm Log
This procedure describes how to enable alarm logging, disable logging and
erase logged events.
1. Click C
2. Click the General Configurations link under the Fault Management
3. (Optional) If you want to stop logging alarms when the log is full, select
4. (Optional) If you want to erase all events in the log and return Logging,
5. (Optional) If you do not want to log new events, select Suspend in the
6. Click A
7. Click S
Voyager Reference Guide
.
ONFIG
Configuration section.
.
PPLY
to make your changes permanent.
AVE
.
ONFIG
Configuration section.
Halt in the L F
OG ULL
erases the oldest alarm events to allow for new alarm events.
select Flush in the L
L C
drop-down list. The default is Logging.
OG ONTROL
.
PPLY
to make your changes permanent.
AVE
M
AULT ANAGEMENT
A
drop-down list. The default is Wrap, which
CTION
C
drop-down list. The default is Logging.
OG ONTROL
drop-down list.
623