Nokia Voyager Reference Manual page 444

7
Configuring Traffic Management
1. Click C
2. Click Transparent Mode in the Interface section
3. Click The N
transparent mode group you would like to disable.
4. Click A
5. Click S
Enabling VRRP for a Transparent Mode Group
If you are enabling VRRP on a VRRP master, the node will perform
transparent mode operations as described in the section,
Description."
local destinations.
For more information on configuring VRRP, see
Note
Transparent Mode supports VRRP only with hubs or switches that
support port mirroring.
This procedure describes how to enable VRRP for a transparent mode group.
1. Click C
2. Click Transparent Mode in the Interface section
3. Click the link of the transparent mode group to which you would like to
enable VRRP.
4. Click the Y
5. Click A
6. Click S
446
on the home page.
ONFIG
radio button in the E
O
.
PPLY
to make your changes permanent
AVE
As a VRRP standby, it will drop all packets except those with
on the home page.
ONFIG
radio button in the VRRP E
ES
.
PPLY
to make your changes permanent
AVE
column associated with the
NABLE
"Transparent Mode
"VRRP Description."
table.
NABLED
Voyager Reference Guide