Table of Contents
Advertisement
!
!
!
!
!
!
!
The following values can be used to mark traffic:
!
!
Note
The DSfield and QueueSpec field are used to mark and select the priority
level.
Masks can be applied to most of these properties to allow wildcarding. The
source and destination port properties can be edited only when the IP protocol
is UDP, TCP, or the keyword "any."
All of these properties are used to match traffic. The packets that match a rule
whose action is set to "prioritize" are marked with the corresponding DSfield
and sent to the queue set by QueueSpec field. The DSfield and QueueSpec
field can only be edited when the Action field is set to "prioritize."
Voyager Reference Guide
IP source address
IP destination address
IP protocol
UDP/TCP source port
UDP/TCP destination port
TCP establishment flags—When selected, traffic matches this rule when
it is part of the initial TCP handshake.
Type of Service (TOS) for IPv4; Traffic Class for IPv6
DiffServ codepoint (DSfield)
Queue Specifier (QueueSpec)
407
Advertisement
Table of Contents
