Nokia Voyager Reference Manual page 170

Hide thumbs Also See for Voyager:

Table of Contents

Configuring Interfaces

21. Click the logical interface name in the I

22. Enter the IP address for the local end of the link in the L

23. Enter the IP address of the remote end of the link in the R

24. (Optional) Change the interface's logical name to a more meaningful one

by typing the preferred name in the L

25. (Optional) Add a comment to further define the logical interfaces function

To make your changes permanent, click S

Try and ping the remote system from the command prompt. If the remote

system does not work, contact your service provider to confirm the

configuration.

Configuring an E1 Interface for Frame Relay

2. Click the Interfaces link.

3. Click the physical interface link you want to configure in the P

4. (Optional) Click O

internal clock on the E1 device. Click A

If you're connecting to a device or system that does not provide a clock

source, set I

edit box. Click A

edit box. Click A

on the home page.

table to go to the Interface page.

; otherwise, set it to O

column of the

edit box. Click

field to set the

Voyager Reference Guide