Nokia Voyager Reference Manual page 535

Hide thumbs Also See for Voyager:

Table of Contents

3. Click the

4. Click the Modem Configuration link next to the

5. Click the ON radio button in the M

6. Enter a value, in minutes, in the I

7. Enter a value, in minutes, in the S

8. Click the

9. If you enabled modem dialback, enter a value in the D

To make your changes permanent, click S

Voyager Reference Guide

radio button in the A

This action takes you to the Modem Configuration page.

The modem is configured to answer any incoming calls.

This value is the length of time, in minutes, that a connected call on the

modem can remain inactive (that is, no traffic is sent or received) before

the call is disconnected. Setting the value to 0 disables the timer (that is,

the call will never be disconnected due to inactivity).

configure the Modem Status monitor.

This value is the length of time, in minutes, between modem line status

tests. Once every interval, the system tests that the modem is present and

online. If the modem is not detected or is offline, a message is logged

using syslog. Setting the value to 0 disables the Modem Status monitor.

radio button in the E

enable modem dialback.

When set to Yes, an incoming call on the modem is dropped after you log

in, and the modem automatically calls the D

connects a login process to the line.

The dialback feature uses this number to back an authenticated user (for

example, 408 555 0093). If dialback is disabled, ignore this value.

field; then click

radio button in the

COM2 field to turn on the

IALBACK LOGIN