Nokia Voyager Reference Manual page 481

Hide thumbs Also See for Voyager:

Table of Contents

exceed the maximum, Voyager will display an error message. For best

perfomance, you should set the Priority Delta to 80 percent of the Priority

divided by the number of Backup Addresses.

To make your changes permanent, click S

Changing the Backup Address List of a Virtual Router

in Monitored Circuit Mode (Simplified Configuration)

Virtual routers are used to back up other routers' addresses; however, they

must be updated manually whenever the IP addresses of the other routers

2. Click the VRRP link in the Router Services section.

3. Locate the backup address and virtual router with the IP address you want

4. To remove a backup address from the list, click the Delete check box that

5. To add an IP address to the list, enter the IP address in the B

The IP address is the address of the default router this system will back

up. It must be in the same IP subnet as one of the addresses on this

To make your changes permanent, click S

Voyager Reference Guide

on the home page.

You can locate the virtual router information using the VRID column.

corresponds to the address. Click A

edit box. Click A