Nokia Voyager Reference Manual page 242

6
Configuring Routing
on a multiaccess LAN. Assert messages include these values when more
than one router is capable of forwarding the multicast packets.
Note
Assert rank values for all routers on a multiaccess LAN that are running
the same protocol must be the same.
16. Click A
17. To make your changes permanent, click S
Configuring Sparse-Mode PIM (PIM-SM)
1. Click C
2. Click the PIM link in the Routing Configuration section.
3. In the PIM I
4. Click A
5. In the Interfaces section, click the O
on which you want to run PIM.
Note
There is no limit to the number of interfaces on which you can run PIM.
6. Click A
7. (Optional) For each interface that is running PIM, enter the specified local
address in the L
send advertisements on the interface. This option is useful only when
multiple addresses are configured on the interface.
Note
If neighboring routers choose advertisement addresses that do not
appear to be on a shared subnet, then all messages from the neighbor
242
.
PPLY
on the home page.
ONFIG
M
NSTANCE ODE
.
PPLY
.
PPLY
A
OCAL DDRESS
.
AVE
field, click the O
radio button for sparse.
N
radio button(s) for each interface
N
edit box. PIM will use this address to
Voyager Reference Guide