Table of Contents
Advertisement
8
Configuring Router Services
Changing Authentication Method and Password in
Monitored Circuit Mode (Simplified Configuration)
The authentication method provides a simple way to avoid attacks from
remote and local networks. The authentication method selected must be the
same for all routers running VRRP on a shared media network.
1. Click C
2. Click the VRRP link in the Router Services section.
3. Locate the interface with the authentication method or password you want
to change.
4. Click the N
method used by VRRP on this interface's LAN. Click A
The value in this field must be the same for all routers running VRRP on
this interface's LAN
5. If you selected S
P
The value in this field must be the same for all routers running VRRP on
this interface's LAN.
To make your changes permanent, click S
Creating a Virtual Router in Monitored Circuit Mode
(Legacy Configuration)
1. Click C
2. Click the VRRP link in the Router Services section.
3. Click the VRRP Configuration link.
4. Click the M
which you want to enable Monitored Circuit. Click A
5. Enter the VRID in the C
A
484
on the home page.
ONFIG
or S
ONE
IMPLE
IMPLE
edit box. Click A
ASSWORD
on the home page.
ONFIG
ONITORED
.
PPLY
radio button to select the authentication
, enter the authentication password string in the
.
PPLY
.
AVE
C
radio button next to the interface for
IRCUIT
V
R
REATE
IRTUAL
OUTER
.
PPLY
.
PPLY
edit box, and then click
Voyager Reference Guide
Advertisement
Table of Contents
