Atm Example - Nokia Voyager Reference Manual

Hide thumbs Also See for Voyager:

Table of Contents

4. Find the ATM logical interface you want to remove in the L

5. To make your changes permanent, click S

ATM Example

This section describes how you might configure the interfaces of your

network application platform (unit) in an example network, using Voyager.

Before you can configure interfaces using Voyager, you must first configure

an IP address on one of the interfaces. You can do this through the unit

console port during installation or by using the Lynx browser. This allows a

graphical browser such as Internet Explorer or Netscape Navigator to access

the unit through that interface. You can use any graphical web browser to

configure the other interfaces on the unit by entering the IP address of the unit

in the location field of the browser.

Voyager Reference Guide

table and click the corresponding D

The ATM logical interface disappears from the list.

button. Click