Table of Contents
Advertisement
6
Configuring Routing
4. Enter
5. Enter
A
6. Enter
A
Platform A
1. Configure an EBGP peer on Platform A as in
Interface"
2. Enter
3. Configure the inbound and route redistribution policies.
4. Click on the link for specific peer you configured in Step 1. This action
takes you the page that lets you configure options for that peer.
5. In the Nexthop field, click the on button next to EBGP Multihop to enable
the multihop option, and then click A
6. (Optional) Enter a value in the TTL edit box to set the number of hops
over which the EBGP multihop session is established. The default value
is 64 and the range is 1-255. Click A
Platform B
1. Configure an EBGP peer on Platform B as in
Interface"
2. Enter
3. Configure the inbound and route redistribution policies.
4. Click on the link for specific peer you configured in Step 1. This action
takes you the page that lets you configure options for that peer.
5. In the Nexthop field, click the on button next to EBGP Multihop to enable
the multihop option, and then click A
318
in the M
ASK LENGTH
32
in the A
129.10.2.1
.
PPLY
in the A
129.10.1.1
.
PPLY
.
as the local address on the BGP page. Click A
1.2.3.4
.
as the local address on the BGP page.
5.6.7.8
edit box; then click A
DDITIONAL GATEWAY
DDITIONAL GATEWAY
"Configuring an Ethernet
.
PPLY
PPLY
"Configuring an Ethernet
.
PPLY
.
PPLY
edit box and then click
edit box and then click
.
PPLY
Voyager Reference Guide
Advertisement
Table of Contents
