Configuring Security Parameters For A Cops Client Id - Nokia Voyager Reference Manual

7
Configuring Traffic Management

Configuring Security Parameters for a COPS Client ID

The Nokia implementation lets you configure send and receive key IDs for
each COPS Client ID to authenticate sessions with the PDP, or policy server.
1. Click either C
Management link on the home page.
2. Click the COPS link in the Traffic Management section.
3. In the C
link. This action takes you to the COPS Diffserv specific configuration
page.
4. In the COPS
name of the COPS Client ID for which you want to configure security.
This action takes you to the COPS Security Configuration page for that
client.
5. In the S
2147483647 to define the sequence number used for the COPS protocol.
Click A
6. In the K
edit box to define the send key ID used for the COPS protocol.
7. In the K
next to the S
COPS protocol. Use alphanumeric characters only. Click A
8. In K
edit box to define the receive key ID used for the COPS protocol.
9. In the K
next to the R
COPS protocol. Use alphanumeric characters only. Click A
Note
You can configure up to 5 receive key IDs.
424
on the Voyager home page or click the Traffic
ONFIG
COPS M
ONFIGURED
SECURITY CONFIGURATION
N
EQUENCE UMBER
.
PPLY
ID field, enter a value between 1 and 2147483647 in the S
EY
field, enter a string value of up to 64 characters in the edit box
EY
K ID value. This value defines the key used for the
END EY
ID field, enter a value between 1 and 2147483647 in the R
EY
field, enter a string value of up to 64 characters in the edit box
EY
K ID value. This value defines the key used for the
ECV EY
section click the Diffserv PIB
ODULES
section, click on the link for the
edit box, enter a value between 1 and
Voyager Reference Guide
END
.
PPLY
ECV
.
PPLY