Nokia Voyager Reference Manual page 480

8
Configuring Router Services
4. Change the number in the P
This number indicates the preference of this router relative to the other
routers configured to back up the virtual router. The higher the number,
the higher the preference.
To make your changes permanent, click S
Changing the Hello Interval of a Virtual Router in
Monitored Circuit Mode (Simplified Configuration)
1. Click C
2. Click the VRRP link in the Router Services section.
3. Locate the virtual router with the hello interval you want to change.
4. Change the number in the H
VRID. Click A
The hello interval should be the same value on all systems with this
virtual router configured.
To make your changes permanent, click S
Changing the Priority Delta of All Backup Addresses in
Monitored Circuit Mode (Simplified Configuration)
1. Click C
2. Click the VRRP link in the Router Services section.
3. Locate the virtual router with the Priority Delta you want to change.
4. Enter a number in the P
Note
The Priority Delta must not be greater than the virtual router's Priority
divided by the number of Backup Addresses for that virtual router. If you
482
RIORITY
on the home page.
ONFIG
ELLO INTERVAL
.
PPLY
on the home page.
ONFIG
RIORITY
edit box. Click A
.
AVE
edit box for the matching
.
AVE
D
edit box. Click A
ELTA
Voyager Reference Guide
.
PPLY
.
PPLY