Transport Rule - Nokia Voyager Reference Manual

Hide thumbs Also See for Voyager:

Table of Contents

Configuring Security and Access

This action displays a new table, L

13. From the pulldown menu in the S

name that corresponds to the source of the traffic that will be protected by

this policy. Click A

Repeat this operation to add as many filters as necessary. Click A

after each selection.

If there are 40 or more source or destination filters, they will not be

displayed as a list on the Voyager page. To view a filter that is not

displayed, type the name of the filter in the appropriate field.

14. From the pulldown menu in the D

filter name that corresponds to the destination of the traffic that will be

protected by this policy. Click A

Repeat this operation to add as many filters as necessary. Click A

after each selection.

15. ((Optional) In the O

16. To make your changes permanent, click S

Transport Rule

2. Click the IPsec.

3. Click the IPsec Transport Rules Configuration link at the bottom of the

page. The IPsec Transport Rules page is displayed. The structure of this

page is common to both IPv4 and IPv6.

4. Enter the name of the new rule in the N

menu. Click A

on the home page.

field select the desired option from the pulldown

ELECT A POLICY

table, select the option I

column, select a filter

column, select a

Voyager Reference Guide