Nokia Voyager Reference Manual page 595

Hide thumbs Also See for Voyager:

Table of Contents

Proposal and Filters

1. Under the P

If the AH button is selected, the

always be set to NONE. If this is not done, an error message is displayed

when you click

2. Under the F

Destination filters across multiple rules (tunnel or transport) should not

overlap though source filters can overlap.

Each Voyager page displays a maximum of 10 proposals and/or 10 filters.

If you create more than 10, they are continued on new pages. Access

these pages by clicking the link directly below the appropriate section.

The link to more pages appears only after you create more than 10

proposals or filters.

Voyager Reference Guide

edit box. Select either the ESP or AH button.

From the pulldown menu in the A

fields, select the necessary algorithms. Click A

box for the sub-network that you want to control. Enter the subnet address

and the mask length in the A

After clicking A

list. If needed, you can then define a protocol and/or a port. Defaults are

assumed. Repeat this operation for as many networks as needed.

table, enter a name for a new proposal in the N

UTHENTICATION

table, enter a new filter name in the N

, the new filter information is added to the Filters

(algorithm) must