Table of Contents
Advertisement
10
Configuring Security and Access
client, or the client may give you errors. See your SSH client documentation
for more information.
1. Click C
2. Click the Secure Shell (SSH) link in the Security and Access
Configuration section.
3. Click the Go to the key pairs page link.
4. (Optional) To generate an RSA host key (to be used with SSHv1), select
the key size, listed in bits, from the G
drop-down list.
Note
The most secure value is 1024 bits. Values over 1024 bits will cause
problems for some clients, including those based on RSAREF.
5. Click A
6. (Optional) To generate an RSA host key (to be used with SSHv2), select
the key size, listed in bits, from the G
drop-down list.
7. Click A
8. (Optional) To generate a DSA host key (to be used with SSHv2), select
the key size, listed in bits, from the G
drop-down list. The recommend value is 1024 bits.
9. Click A
10. Click S
Note
Recreating keys might cause problems with some clients, because the
server will be using a key different from the one it used before. You can
reconfigure the client to accept the new key.
552
on the home page.
ONFIG
.
PPLY
.
PPLY
.
PPLY
to make your changes permanent.
AVE
N
RSA
ENERATE
EW
N
RSA
ENERATE
EW
N
DSA H
ENERATE
EW
Voyager Reference Guide
1 H
K
V
OST
EY
2 H
K
V
OST
EY
K
OST
EY
Advertisement
Table of Contents
