Ipv6 And Ipv4 Compatibility - Nokia Voyager Reference Manual

Hide thumbs Also See for Voyager:

Table of Contents

9. To flush current dynamic Neighbor Discovery entries, click the F

IPv6 and IPv4 Compatibility

Configuring IPv6 in IPv4 Tunnels

If your IPv6 traffic needs to travel through IPv4 networks to reach its

destination, you need to set up a virtual link by configuring a tunnel.

2. Click the IPv6 in IPv4 Tunnels link in the IPv6 section.

3. Enter the IPv4 address of the local tunnel endpoint in the L

Voyager Reference Guide

value represents the number of times to retry Unicast Neighbor Discovery

for the multicast retry limit in the M

value represents the number of times to retry Multicast Neighbor

Discovery requests.

for the duplicate address detection retry limit in the D

number of times to retry Duplicate Address Detection Neighbor

Discovery requests.

permanent IPv6 address for the permanent neighbor discovery destination

, and then click S

button in the D

on the home page.

edit box. This value represents the

to make your changes permanent.

field, enter the value

edit box. This

field, enter the value

field, enter the

field, and then