Nokia Voyager Reference Manual page 51

Displaying Slot Statistics
To display the statistical information, follow these instructions:
1. Click M
2. Click the Slot Status link.
Displaying Cryptographic Acceleration States
Use this procedure to monitor the Nokia Cryptographic Acceleration Card.
1. Click M
2. Click the Cryptographic Accelerator Statistics link in the Hardware
Displaying IPv6 Running States
Use this page to monitor the IPv6 running state.
1. Click Monitor on the home page.
2. Click the IPv6 Monitor link to display IPv6 running state.
Displaying Routing Daemon Status (iclid)
Obtain routing diagnostic information by creating a telnet session on the
network application platform (NAP) and running iclid (IPSRD Command-
Line Interface Daemon).
To display routing daemon status using iclid, follow these instructions.
1. Create a telnet session and log into the firewall.
2. Type
The prompt will change (to <node-name>) to indicate that you can now enter
iclid commands.
Voyager Reference Guide
on the home page.
ONITOR
on the home page.
ONITOR
Monitoring section.
iclid
51