Nokia Voyager Reference Manual page 142

5
Configuring Interfaces
Nokia Platform A. The interface is connected to Nokia Platform B via ATM
PVC 42 and to Nokia Platform C via ATM PNC 53. Nokia Platform B and
Nokia Platform C are connected to each other via an ATM PVC; their ATM
interfaces have already been configured.
1. Click C
2. Click the Interfaces link.
3. Click the physical interface link you want to configure in the P
column.
Example—
atm-s2p1
You are taken to the Physical Interface page.
4. Create a logical interface using the Create a new LLC/SNokia Platform
RFC1483 interface section by selecting LIS in the T
5. Enter
6. Click A
7. Click the newly created interface (atm-s2p1c0) in the L
I
8. Enter
9. Enter
10. Click A
11. (Optional) Change the interface's logical name to a more meaningful one
by typing the preferred name in the L
A
12. (Optional) Add a comment to further define the logical interfaces function
in the C
13. Click S
142
on the home page.
ONFIG
in the VCI(
42,53
.
PPLY
table to reach the Logical Interface page.
NTERFACES
in the IP A
10.0.0.1
in the M
ASK
24
.
PPLY
.
PPLY
edit box. Click A
OMMENTS
.
AVE
) edit box.
S
edit box.
DDRESS
L
edit box.
ENGTH
OGICAL NAME
.
PPLY
HYSICAL
selection box.
YPE
OGICAL
edit box. Click
Voyager Reference Guide