Nokia Voyager Reference Manual page 106

5
Configuring Interfaces
Removing a DDR List from an Interface
1. Click C
2. Click the Dial on Demand Routing Configuration link under the Traffic
Management section.
3. Locate the appropriate DDR list.
4. Click the D
Selected Interfaces section that you want to remove; then click A
The interface will disappear from the Selected Interfaces section.
5. To make your changes permanent, click S
Example DDR List
The following example illustrates how to configure a DDR list so that RIP
packets do not cause an ISDN connection to be established nor keep an active
connection running. RIP packets can, however, be exchanged over an
established ISDN connection.
The DDR list will be added to the ISDN interface "isdn-s2p2c1."
1. Click C
2. Click the Dial on Demand Routing Configuration link under the Traffic
Management section.
3. Enter
4. Under the E
R
5. Enter
FOR
6. Select
RULES FOR
7. Select
click A
8. Click S
106
on the home page.
ONFIG
check box next to the interface (on the right) under the
ELETE
on the home page.
ONFIG
in the C
REATE
NotRIP
XISTING RULES FOR
B
check box; then click A
ULE EFORE
in the D
EST
520
N RIP table.
OT
from the Action drop-down window in the E
ignore
N RIP table.
OT
from the Add Interfaces drop-down window; then
isdn-s2p1c1
.
PPLY
.
AVE
AVE
N DDR L
EW IST
N RIP table, click the A
OT
PPLY
P R edit box in the E
ORT ANGE
PPLY
.
edit box; then click A
N
DD EW
.
XISTING RULES
XISTING
Voyager Reference Guide
.
.
PPLY