Table of Contents
Advertisement
S e t t i n g s
Personal config. sett.
— to manually add new personal accounts for various services and to activate or delete them. To add
•
a new personal account if you have not added any, select Add; otherwise, select
and select and enter each of the required parameters. The parameters differ according to the selected service type. To delete
or activate a personal account, scroll to it, and select
Security
When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing), calls may be
possible to the official emergency number programmed into your device.
Select
Menu
Settings
Security
>
>
PIN code request
and
UPIN code request
•
switched on. Some SIM cards do not allow the code request to be turned off.
PIN2 code request
— to select whether the PIN2 code is required when using a specific device feature which is protected
•
by the PIN2 code. Some SIM cards do not allow the code request to be turned off.
Call barring service
— to restrict incoming calls to and outgoing calls from your device (network service). A barring password
•
is required.
Fixed dialling
— to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card.
•
When the fixed dialing is on, GPRS connections are not possible except while sending text messages over a GPRS connection.
In this case, the recipient's phone number and the message center number must be included in the fixed dialing list.
Closed user group
— to specify a group of people whom you can call and who can call you (network service)
•
Security level
— Select
Phone
•
device. If you select Memory, the device asks for the security code when the SIM card memory is selected, and you want to
change the memory in use.
Access codes
— to change the security code, PIN code, UPIN code, PIN2 code, or barring password
•
Code in use
— to select whether the PIN code or UPIN code should be active
•
Authority certificates
or
•
device.
See "Certificates," p. 39.
Security module sett.
— to view
•
signing PIN.
See "Access codes," p. 7.
Software updates over the air
Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the
installation is completed and the device is restarted. Be sure to back up data before accepting installation of an update.
Your service provider may send device software updates over the air directly to your device (network service). This option may
not be available, depending on your device.
Software update settings
To allow or disallow software updates, select
updates
and the following options:
Always allow
— to perform all software downloads and updates automatically
•
Always reject
— to reject all software updates
•
— to perform software downloads and updates only after your confirmation (default setting)
Confirm first
•
Request a software update
Select
Menu
Settings
Phone
>
>
Current softw. details
to display the current software version and check whether an update is needed. Select
softw.
to download and install a software update. Follow the instructions on the display.
Install a software update
If the installation was canceled after the download, select
The software update may take several minutes. If there are problems with the installation, contact your service provider.
Restore factory settings
To reset some of the menu settings to their original values, select
code.
The names and phone numbers saved in
© 2007 Nokia. All rights reserved.
Options
and from the following options:
— to set the device to ask for your PIN or UPIN code every time the device is
to set the device to ask for the security code whenever a new SIM card is inserted into the
User certificates
— to view the list of the authority or user certificates downloaded into your
Secur. module
details, activate
Menu
Settings
>
Phone updates
to request available software updates from your service provider. Select
>
Contacts
are not deleted.
Options
Delete
or Activate.
>
Module PIN
request, or change the module PIN and
Configuration
Device manager sett.
>
>
to start the installation.
Install softw. update
Menu
Settings
Rest. factory
>
>
28
Add
new. Select the service type,
>
Serv. softw.
>
Downl. phone
sett.. Enter the security
Free Datasheet http://www.datasheet4u.com/
Advertisement
Table of Contents
