Nokia Voyager Reference Manual page 64

4
Monitoring and Configuring System Resources
4. After verifying that the change is appropriate, issue the same
5. Reboot the system.
Because these console messages are also written to the FW-1 log message
file, Nokia recommends that you do the following to prevent depleting the
disk space allocated for the FW-1 log message file:
1. Move your log file(s) from the system hard drive to a server.
2. Configure the relocated files using the Check Point management client
GUI (Smart Dashboard) as follows:
a. Select the Check Point gateway object you are configuring.
b. Under Gateway Object Configuration, select the Logs and
64
command without the
modzap _fw_log_bufsize $FWDIR/boot/modules/fwmod.o
0x200000
A confirmation message is displayed, which you can safely ignore.
Masters.section and do the following:
Specify the amount of free disk space required for local logging.
!
! Specify to stop logging when the free disk space drops below
x MBytes and to start logging to a new file.
Once a new file is being used, the previously used log files are deleted
until the required free disk space is restored.
option:
-n
Voyager Reference Guide