Table of Contents
Advertisement
6
Configuring Routing
Setting the Rank for Static Routes
1. Click C
2. Click the Static Routes link in the Routing Configuration section. You are
now in the Static Routes page. Click the Advanced Options link.
3. To set the rank for each static route you have configured, enter a value in
the R
The system uses the rank value to determine which route to use when
there are routes from different protocols to the same destination. For each
route, the system uses the route from the protocol with the lowest rank
number.
The default for static routes is 60. The range you can enter is 0-255.
4. Click A
Configuring Multiple Static Routes
The implementation allows you to add and configure many static routes at the
same time.
1. Click C
2. Click the Static Routes link in the Routing Configuration section.
3. In the Q
TYPE
The default is normal. For more information on static route types, see
"Static Routes Description"
4. In the Q
length, and add on or more next hop IP addresses for each static route you
want to add. Use the following format:
IP address/mask length next hop IP address
The IP addresses must be specified in a dotted-quad format ([0-255]).[0-
255].[0-255].[0-255])
The range for the mask length is 1-32.
270
on the home page.
ONFIG
edit box.
ANK
, and then click S
PPLY
on the home page.
ONFIG
-
UICK
ADD STATIC ROUTES
drop-down window, and select
-
UICK
ADD STATIC ROUTES
to make your changes permanent.
AVE
field, click the Q
,
NORMAL
REJECT
.
text box, enter an IP address, its mask
Voyager Reference Guide
-
UICK
ADD NEXT HOP
, or
.
BLACK HOLE
Advertisement
Table of Contents
