Nokia Voyager Reference Manual page 636

12
Configuring SNMP
5. To delete an existing receiver, click the O
field. Click A
6. To make your changes permanent, click S
Enabling SNMP Traps
The system traps are defined in the Nokia-IPSO-System-MIB. The
ifLinkUpDown trap is defined in the IF-MIB. The clustering traps are defined
in the Nokia-IPSO-LBCluster-MIB. The Disk Mirror traps are defined in the
Nokia-IPSO-System-MIB. The text files that define the MIBs are located in
the /etc/snmp/mibs directory.
Below is a list of the objects associated with individual traps.
The systemTrapConfigurationChange, systemTrapConfigurationFileChange,
and systemTrapConfigurationSaveChange traps are associated with the
ipsoConfigGroup objects. These objects include ipsoConfigIndex,
ipsoConfigFilePath, ipsoConfigFileDateAndTime, ipsoConfigLogSize,
ipsoConfigLogIndex, and ipsoConfigLogDescr.
The systemTrapDiskMirrorSetCreate, systemTrapDiskMirrorSetDelete,
systemTrapDiskMirrorSyncFailure, and systemTrapDiskMirrorSyncSuccess
traps are associated with the ipsoDiskMirrorGroup objects. These objects
include ipsoTotalDiskMirrorSets, ipsoMirrorSetIndex,
ipsoMirrorSetSourceDrive, ipsoMirrorSetDestinationDrive,
ipsoMirrorSetSyncPercent.
The linkUp and linkDown traps are associated with the ifIndex,
ifAdminStatus, and ifOperStatus objects.
Note
The Nokia implementation of SNMPv3 does not yet support SNMPv3
traps.
1. Click C
2. Click the SNMP link.
638
.
PPLY
on the home page.
ONFIG
radio button in the S
FF
.
AVE
Voyager Reference Guide
TATUS