Table of Contents
Advertisement
7. Enter the IP address of the local end of the GRE tunnel in the L
8. Enter the IP address of the remote end of the GRE tunnel in the R
9. Enter the IP address of the local interface the GRE tunnel is bound to in
10. Enter the IP address of the remote interface the GRE tunnel is bound to in
11. (Optional) Select a value from the TOS
Voyager Reference Guide
Example—
tun0c1
edit box.
ADDRESS
The local address cannot be one of the system's interface addresses and
must be the remote address configured for the GRE tunnel at the remote
router.
edit box.
ADDRESS
The remote address cannot be one of the system's interface addresses and
must be the local address configured for the GRE tunnel at the remote
router.
the L
OCAL ENDPOINT
The local endpoint must be one of the system's interface addresses and
must be the remote endpoint configured for the GRE tunnel at the remote
router.
the R
EMOTE ENDPOINT
The remote endpoint must not be one of the system's interface addresses
and must be the local endpoint configured for the GRE tunnel at the
remote router.
A
.
PPLY
On GRE tunnels, it is desirable to copy or specify the TOS bits when the
router encapsulates the packet. After you select the TOS feature,
intermediate routers between the tunnel endpoints may take advantage of
the QoS features and possibly improve the routing of important packets.
By default, the TOS bits are copied from the inner IP header to the
encapsulating IP header.
edit box.
edit box.
VALUE
OCAL
EMOTE
drop-down window. Click
199
Advertisement
Table of Contents
