Nokia Voyager Reference Manual page 168

Hide thumbs Also See for Voyager:

Table of Contents

Configuring Interfaces

This option appears only if you have set the

This button chooses the framing format for timeslot-0. O

CRC-multiframe format is used; the information is protected by CRC-4.

setting of the CSU/DSU at the other end of the link.

9. Click the O

then click A

This option appears only if you have set the

This value controls whether timeslot-16 is used in channel associated

signaling (CAS). Setting this value to O

be used as a data channel. See fractional settings on the Advanced E1

CSU/DSU Options page.

10. Click the PPP radio button in the E

A logical interface appears in the L

11. Enter a number in the K

interval. Click A

This value sets the interval, in seconds, between keepalive protocol

message transmissions. These messages are used periodically to test for

an active remote system. The range is 0-255. The default is 5.

means that double-frame format is used. This setting must match the

radio button for the E1 T

means that timeslot-16 cannot

NCAPSULATION

edit box to configure the PPP keepalive

field. Click A

Voyager Reference Guide