Gre Tunnels - Nokia Voyager Reference Manual

5
Configuring Interfaces
4. To remove the old IP address, click the D
corresponds to the address you want to delete. Click A
5. To add the new IP address, enter the IP address for the device in the N
IP
Each time you click A
table. The entry fields remain blank to allow you to add more IP
addresses.
6. To make your changes permanent, click S

GRE Tunnels

Creating a GRE Tunnel
GRE tunnels encapsulate IP packets using Generic Routing Encapsulation
(GRE) with no options. The encapsulated packets appear as unicast IP
packets. GRE tunnels provide redundant configuration between two sites for
high availability.
1. Click C
2. Click the Interfaces link.
3. Click Tunnels in the P
4. Click the drop-down window in the C
WITH ENCAPSULATION
5. Click A
Each time you select a tunnel encapsulation and click A
tunnel appears in the logical interfaces table.
6. Click the logical interface name in the I
interfaces table to go to the Interface page for the specified tunnel.
198
edit box. Click A
ADDRESS
PPLY
on the home page.
ONFIG
HYSICAL
field and select GRE.
.
PPLY
ELETE
.
PPLY
, the configured IP address appears in the
.
AVE
column.
REATE A NEW TUNNEL INTERFACE
NTERFACE
check box that
.
PPLY
, the new
PPLY
column of the Logical
Voyager Reference Guide
EW