Serial Interface Example - Nokia Voyager Reference Manual

18. (Optional) Change the interface's logical name to a more meaningful one
To make your changes permanent, click S

Serial Interface Example

This section describes how you might configure the interfaces of your
network application platform (unit) in an example network, using Voyager.
Before you can configure the unit using Voyager, you must first configure an
IP address on one of the interfaces. You can do this through the unit console
port during installation or by using the Lynx browser. This allows a graphical
browser such as Internet Explorer or Netscape Navigator to access the unit
through that interface. You can use any graphical web browser to configure
the other interfaces on the unit by entering the IP address of the unit in the
location field of the browser.
Voyager Reference Guide
by typing the preferred name in the L
A .
PPLY
edit box. Click
OGICAL NAME
.
AVE
149