Table of Contents
Advertisement
To configure EF, see
information about creating ACL rules. Choose prioritize as the action for one
or more rules. Enter the appropriate values in the DSfield and QueueSpec edit
boxes. See
Aggregation Class meters. You should associate the AGC with the prioritize
rule(s) of the ACL.
Creating an Access Control List
To set up an Access Control List (ACL), you must configure the interface(s)
with which you want to associate the ACL and the Bypass option. IPSO
supports both the IPv4 and IPv6 protocols. To configure an interface, see
"Applying an Access Control List to an Interface"
denotes that the entire packet stream flowing out of the selected interfaces
should not be classified, policied, or marked. Instead, the output queue
scheduler should use the supplied IP TOS as an output queue lookup. Use the
Bypass option to circumvent the classifier and policer for selected interfaces.
1. Click C
2. IPSO supports both the IPv4 and IPv6 protocols.
3. Enter a name for the ACL in the C
4. To make your changes permanent, click S
Voyager Reference Guide
"Description of Access Control List Rules"
"Creating an Aggregation Class"
on the home page.
ONFIG
a. For IPv4 ACLs, click the Access List Configuration link under the
T
M
RAFFIC
ANAGEMENT
b. For IPv6 ACLs, click the IPv6 link. This takes you to the IPv6 page.
Click the Access List Configuration link under the T
M
section.
ANAGEMENT
Click A
.
PPLY
The Access Control List name, D
A
L
field appear.
CCESS
IST
for information about creating
. The Bypass option
section.
N
REATE A
EW
check box, and B
ELETE
.
AVE
for
RAFFIC
A
L
edit box.
CCESS
IST
YPASS THIS
403
Advertisement
Table of Contents
