Lp-114 Board Replacement - Sony HDCAM HDW-F900R Maintenance Manual

6-21. LP-114 Board Replacement

1. Remove the precision screw (P2.6 x 5) and remove
the rear cover assembly in the direction of the arrow.
m
. Be careful not to lose the washer.
. The two drop protections are not fixed. Be careful
not to lose it.
2. Disconnect the harness from the connector (CN116)
on the LP-114 board.
3. Remove the two precision screws (P1.4 x 3.5) and
remove the LP shield plate and the LP-114 board.
n
Be careful not to lose the LP shield plate.
4. Install the new LP-114 board by reversing the steps of
removal.
HDW-F900R/V1 (E)
Precision screw
P2.6 x 5
Rear cover assembly
LP shield plate
Washer
LP-114
board
CN116
Drop protection
(SW) (washer)
Drop
protection
(TALLY)
Precision
screws
P1.4 x 3.5
6-35