Top Menu - Sony HDCAM HDW-F900R Maintenance Manual

4-2. TOP Menu

While pressing the rotary encoder, set the MENU ON/OFF switch to ON. Then the TOP menu appears.
However, the TOP menu is not displayed when the switch S3 (TOP MENU DISABLE)/AT-172 board is
in the ON position.
TOP MENU Display
S <TOP MENU>
→
USER
USER MENU CUSTOMIZE
ALL
. OPERATION
PAINT
.
. MAINTENANCE
. FILE
. DIAGNOSIS
SERVICE
Menu
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
SERVICE
HDW-F900R/V1 (E)
Function
Use the USER menu to set the functions that are used for daily routine operations
such as MONITOR OUT setting.
(This menu appears when the MENU ON/OFF switch is set to ON normally.)
Use this menu to add or delete the pages that are required for the USER menu to suit
operators' needs depending on applications.
(For more details, refer to "5-1-3. Editing the USER Menu" of Operation Manual.)
The ALL menu contains all pages of each category of the "USER 1" to "USER 19"
pages edited by "USER MENU COSTOMIZE", "ASSIGN ITEM SEL" page, OPERA-
TION, PAINT, MAINTENANCE, FILE and DIAGNOSIS. It means that you can move to
any page from the ALL menu without returning to the TOP menu.
Usually, the camera operator is expected to use the OPERATION menu to set or
change the preference setups to suit the shooting conditions of each object.
Use this menu to implement fine adjustment of pictures by monitoring the camera
output waveform on a waveform monitor etc.
This is the camera maintenance menu. Use this menu to set the PAINT items of lower
operating frequency or to alter the system configuration.
This is the file operation menu. Use this menu to save data in the REFERENCE file
etc.
Use this menu to check the VTR status or to diagnose the circuit boards that are
suspected to have an error.
Use this menu for service and maintenance.
(This menu is enabled when the switch S1-1/AT-172 board is set to ON.)
4-3