Sony HDCAM HDW-F900R Maintenance Manual page 345

Removal
1. Moving the S3 tape guide
Rotate the manual eject gear (A) counter-clock-
wise until the S3 tape guide is located at the
specified position as shown.
2. Removing the S-tension regulator
band assembly
Remove the S-tension regulator band assembly
that is connected to the S-tension regulator
assembly.
(Refer to Section 7-8.)
3. Removing the end sensor assembly
Remove the precision screw and the end sensor
assembly.
(Refer to Section 7-15.)
4. Removing the S-tension regulator
assembly
Remove the two precision screws and S-tension
regulator assembly in the direction of the arrow.
n
Apply grease to the leaf spring of the S-tension
regulator assembly as required.
(Refer to Section 2-2-4.)
HDW-F900R/V1 (E)
S-tension regulator assembly
Precision screws
M1.4 x 3.5
S3 tape guide
7-73