Sony HDCAM HDW-F900R Maintenance Manual page 156

AUDIO-1 Display (Setting-1 on audio)
? 06 O AUDIO-1
AUDIO OUT (F/R) :
REC AUDIO OUT
CAMERA ADAPTER
AUDIO CH3/4 MODE:
FRONT MIC REF
REAR MIC REF
REAR MIC +48V
Item
AUDIO OUT (F/R)
REC AUDIO OUT
CAMERA ADAPTER
AUDIO CH3/4 MODE
FRONT MIC REF
REAR MIC REF
REAR MIC +48V
4-40
CUE
: EE
: ENABL
SW
: -50dB
: -60dB
: ENABL
Setting
CUE/EE
EE/SAVE
ENABL/DSABL
CH1/2/SW
_60 dB/_50 dB/_40 dB
_60 dB/_50 dB/_40 dB
ENABL/DSABL
Function
Selects the audio output signal during FF/REW.
Selects the audio output signal during recording.
EE : EE output
SAVE : No output
Selects whether the AUDIO IN CH3, CH4 of the
camera adapter is enabled to use or not enabled
when camera adapter is installed.
ENABL : Camera adapter can be used.
DSABL : Camera adapter cannot be used.
Selects the input signal to be recorded on CH3/4.
CH1/2 : Same signals as CH1 and CH2.
SW : The input signals that are selected by the
AUDIO IN CH3, CH4 switches on the inside
panel.
Sets the reference input level of the front microphone.
Sets the reference input level of AUDIO IN at the
rear.
Selects whether or not to enable the 48V power input
microphone from AUDIO IN.
ENABLE: Can be used.
DSABL: Cannot be used.
HDW-F900R/V1 (E)