Notes On Replacement Of Circuit Board; Eeprom Data; Actions To Be Taken During Board Replacement And After Board Replacement/Repair - Sony HDC-P1 Maintenance Manual

1-9. Notes on Replacement of Circuit Board

1-9-1. EEPROM Data

The table below lists data retained in the EEPROM (FRAM) on respective boards.
n
Do not replace the EEPROM ICs listed in the table because they retain board-specifi c data.
The part number listed in "Spare Parts" is for EEPROM which is not programmed. If replacement is
needed, contact your local Sony Sales Offi ce/Service Center.
Board Ref No.
AT-163APT IC133
IC403
DPR-315 IC601
DPR-316 IC701
IF-1129 IC200
IC502
MB-1158 IC2
NR-80P IC5
TG-265PT IC201
IC214
1-9-2. Actions to Be Taken during Board Replacement and after Board
Replacement/Repair
Board
AT-163APT
DPR-316
MB-1158 (IC2)
NR-80P (IC5)
TG-265PT (IC214)
HDC-P1
Stored data
Board adjustment data and paint data
PLD data
PLD data
PLD data
Network setting information (including MAC address)
PLD data
Filter position data
RPN adjustment data
PLD data
CCD adjustment data
Action
1-9-3. Adjustment/Setting Items when Replacing the AT-163APT Board
3-8. VBS Output Level Adjustment
IC2 initial value setting
(Execute STORE FILE on any page of the SERVICE menu.)
3-3-6 RPN Adjustment
3-6. RPN Compensation
3-3-1. BLACK SET Adjustment
3-3-2. Sensitivity Adjustment
3-3-3. V-SUB Adjustment
3-3-4. BLACK SHADING Adjustment
3-3-5. White Shading Adjustment
3-5. ND Offset Adjustment
OHB fi le resetting
1-19 (E)