Sony HDCAM HDW-F900R Maintenance Manual page 115

E-x71
Contents : Abnormality is detected in the system control initialization command.
Detecting conditions : The initialization command is not completed within the specified time at the event
of power-on with a cassette being inserted.
. Signal path between the FP-152 board and the SS-92G board is defective.
Suspected cause :
E-x80
Contents : Communication error between SS and EQ
Detecting conditions : Communication cannot be established between the SS-92G board and the EQ-88G
board.
Suspected cause : The EQ board is defective.
E-x81
Contents : EQ switching pulse error
Detecting conditions : None of the switching pulses in the EQ-88G board changes from "H".
Suspected cause : Connection among the MDC-13G board, MDR-14G board, and EQ-88G board is
faulty.
E-x82
Contents : Communication error between SS and AT
Detecting conditions : Communication failure with AT exceeds three seconds, or the checksum of the
data sent from AT does not match for three seconds or more.
. Connection of the connectors on the SS-92G board, AT-172 board, and DCP-43
Suspected cause :
board is faulty.
. The SS-92G board or the AT-172 board is defective.
E-x83
Contents : SS-92G/IC13 program load error
Detecting conditions : Loading of a program to the SS-92G board IC13 is not complete.
Suspected cause : The SS-92G board IC13 is defective.
E-x86
Contents : FORMAT difference error
Detecting conditions : FORMAT of the camera and FORMAT of the VTR are different.
Suspected cause : Connection between AT and SS is faulty.
E-x88
Contents : EEPROM writing error
Detecting conditions : Writing error has occurred in the servo EEPROM.
. The MDC-13G board IC403 is defective.
Suspected cause :
. Signal path between the SS-92G board and the MDC-13G board is faulty.
HDW-F900R/V1 (E)
3-7