Rx-54G Board Replacement - Sony HDCAM HDW-F900R Maintenance Manual

6-19. IF-794G Board, HN-277G Board
and RX-54G Board Replacement
1. Remove the outside panel assembly.
(Refer to Section 1-4.)
2. Open the inside panel assembly.
(Refer to Section 1-5.)
3. Remove the DC-DC converter.
(Refer to Section 6-8.)
4. Remove the CI-32G board.
(Refer to Section 6-11.)
5. Remove the CCM-45G board.
(Refer to Section 6-17.)
6. Remove the PS-595 board.
(Refer to Section 6-18.)
7. Remove the four precision screws fixing the IF-794G
board and remove the connector connecting the IF-
794G board with the HN-277G board.
HDW-F900R/V1 (E)
On the side of
the inside panel
assembly
Precision screws
P1.4 x 2.5
HN-277G
board
IF-794G
board
Precision screws
P1.4 x 2.5
6-31