Service Menu - Sony HDCAM HDW-F900R Maintenance Manual

4-9. SERVICE Menu

m
. To enable use of the SERVICE menu, set the switch S1-1/AT-172 board to ON.
. When the range of setting is surrounded by parenthesis ( ) in the setting column, the setup value is the
relative value. The range of setting in parenthesis ( ) can be different from what shown in the manual
depending on the setting in the layer lower than this menu.
MENU SET Display (Special settings related to the menu)
? 01 O MENU SET
RE ROTATION REV :
RE SPEED
DIRECT VALUE
SERVICE RESET
FACTORY PRESET
Item
RE ROTATION REV
RE SPEED
DIRECT VALUE
SERVICE RESET
FACTORY PRESET
4-66
OFF
: 3
: OFF
: EXEC
: EXEC
Setting
OFF/ON
1/2/3/4/5
OFF/ON
Press the rotary encoder
to execute this menu item.
Press the rotary encoder
to execute this menu item.
Function
Turns ON/OFF the function to invert the rotating
direction of rotary encoder.
Sets the response speed of rotary encoder.
1 (slow) ↔ 5 (fast)
ON : The set value is displayed as it is.
OFF : The set value is displayed after converted
(in the range of _99 to 99.)
(It is returned to OFF when the main power is
turned on.)
Resets the data in the SERVICE hierarchy.
Refer to "5-2. Data Structure" for details of the
hierarchical structure.
Returns all of the settings to the default setting when
shipped from the factory.
(Excluding the black balance automatic adjustment
value.)
HDW-F900R/V1 (E)